Speed Gate GT-70
The GT-70 is a 1400 mm speed gate built for entrances where tailgating detection needs to be taken seriously. The longer body gives the control board a wider detection window to distinguish two people from one, and the sensor coverage is sufficient to make that call reliably in mixed-traffic environments. 55 persons per minute, passage width from 600 to 1100 mm, and IP65 available for outdoor use.
Speed Gate GT-250
The GT-250 is the only gate in our range that reaches 1200 mm passage width, which is also the maximum width for a fire-egress lane under standard inspection requirements. That single fact makes it the default choice whenever a wide main entrance is needed without triggering additional fire-safety planning. A Gatech-developed planetary motor handles the longer arm load reliably over high cycle counts, and a microwave anti-theft module is available for grocery and retail installations.
Speed Gate HG 02
The HG 02 is a flap gate, which means the arms retract vertically into the body rather than swinging open to the sides. This allows the closing signal to be sent the moment a person crosses the arm line, rather than waiting until they have cleared the full swing arc. In practice that fraction of a second makes the gate harder to tailgate than a swing-arm design at equivalent settings. RGB LED illuminated glass arms, 304 stainless steel body, and connection to any access control system.
Speed Gate GT-33
The GT-33 is a full-height speed gate portal with acrylic swing panels and a passage width configurable from 600 to 1200 mm. It combines the physical deterrence of a full-height barrier with the open visual impression of a glass-panel speed gate, which makes it the right choice when 1200 mm clear passage is required without compromising on aesthetics or security level. Suitable for gyms, corporate lobbies and high-security facilities. Indoor use.
Full-Height Turnstile GT-FH
The GT-FH is a full-height turnstile with solid steel rod arms, built for outdoor and high-security entrances where maximum physical deterrence is the priority. It works on the same principle as the GT-5: one authorisation, one person through, no tailgating by design. The steel rod construction is more robust in exposed conditions than polycarbonate alternatives, and the rain cover is included as standard. Like all full-height turnstiles, it communicates a high-security message at the entrance, which is exactly what some sites need and a deliberate choice for others.
Tripod Turnstile GT-50
The GT-50 is a compact tripod turnstile built for gyms, martial arts facilities and stadiums where the priority is reliable access control at a sensible cost. Tripod turnstiles are the most widely used entry control product in the fitness industry, and the GT-50 brings a cleaner finish to the format without changing what makes it practical. Drop-arm safety, bi-directional operation, and connection to any access control system.
Tripod Turnstile 700 E N1
The 700 E N1 is a bridge-frame tripod turnstile built for indoor and outdoor entrances where a two-post design is preferred. It uses the same pass-one-at-a-time principle as single-post tripods, with the bridge frame providing a stable platform for dual-side reader mounting. Drop-arm safety is available as an option for installations where arms-down egress is required on fire alarm or power loss. A heating unit and mounting base are also available on request for exposed outdoor sites.