Speed Gate GT-70
The GT-70 is a 1400 mm speed gate built for entrances where tailgating detection needs to be taken seriously. The longer body gives the control board a wider detection window to distinguish two people from one, and the sensor coverage is sufficient to make that call reliably in mixed-traffic environments. 55 persons per minute, passage width from 600 to 1100 mm, and IP65 available for outdoor use.
Speed Gate GT-250
The GT-250 is the only gate in our range that reaches 1200 mm passage width, which is also the maximum width for a fire-egress lane under standard inspection requirements. That single fact makes it the default choice whenever a wide main entrance is needed without triggering additional fire-safety planning. A Gatech-developed planetary motor handles the longer arm load reliably over high cycle counts, and a microwave anti-theft module is available for grocery and retail installations.
Speed Gate Denia
The Denia is a short-body gate at 280 mm deep with fully retracting arms, built for entrances where depth is the constraint. It is particularly popular in grocery and retail store entrances where saving floor space matters more than maximum tailgating detection range. A microwave sensor on the exit side keeps outbound traffic flowing freely without any interaction, and QR code reader integration makes it a clean fit for self-checkout lanes.
Speed Gate HG 02
The HG 02 is a flap gate, which means the arms retract vertically into the body rather than swinging open to the sides. This allows the closing signal to be sent the moment a person crosses the arm line, rather than waiting until they have cleared the full swing arc. In practice that fraction of a second makes the gate harder to tailgate than a swing-arm design at equivalent settings. RGB LED illuminated glass arms, 304 stainless steel body, and connection to any access control system.
Speed Gate GT-33
The GT-33 is a full-height speed gate portal with acrylic swing panels and a passage width configurable from 600 to 1200 mm. It combines the physical deterrence of a full-height barrier with the open visual impression of a glass-panel speed gate, which makes it the right choice when 1200 mm clear passage is required without compromising on aesthetics or security level. Suitable for gyms, corporate lobbies and high-security facilities. Indoor use.
Swing Gate GL A1
The GL A1 is a wide-wing swing gate built for entrances where wheelchair users, pushchair users and passengers with large luggage need to move through without routing to a separate lane. The cylindrical 230 mm body houses a 10 mm tempered glass wing configurable from 550 to 900 mm wide. It is particularly well suited to airport exit lanes, accessibility routes and retail exits where the visitor profile is mixed and flow needs to be unrestricted. The motorised drive opens the wing slowly enough to be safe at all movement speeds, which makes it the right choice wherever the gate will be used by people who cannot move quickly.
MIFARE 1K Classic Tags
MIFARE 1K Classic is the most widely used physical RFID credential in gym and fitness environments, accounting for the large majority of installed tags in that sector. Available as cards, key fobs and wristbands, with custom printing and numbering. Compatible with the vast majority of access control systems. For offices and higher-security environments, DESFire EV2/EV3 tags are recommended instead.
MIFARE DESFire EV2 / EV3 Tags
MIFARE DESFire EV2 and EV3 are high-security RFID credentials designed for environments where cloning resistance and data integrity matter. AES-128 encryption and Common Criteria EAL5+ certification make them the appropriate choice for offices, corporate facilities and any site where a compromised credential would have meaningful consequences. Available as cards, key fobs and wristbands, with 2K, 4K and 8K memory options. Encryption keys can be programmed in Finland.
